We use cookies on our website.
Some of them are necessary for the functioning of the site, but you can decide about others.
KiloPotentiostat
System for testing and EIS measurements of automotive-grade cells (e.g. 500 cm2) with currents up to 2 kA, AC current for EIS up to 50 A.
SOLUTION DETAILS
- System consists of 100 A potentiostat and high current booster for sink mode
- Example configuration (on pictures):
- Output +/-10 V, source 100 A, sink up to 800 A
- Power up to 4 kW, water cooling
- Can work as true zero-voltage load for low-voltage sources (e.g. single H2 fuel cell)
- Fully digital control and acquisition
- Impedance spectroscopy up to 250 kHz, amplitude up to 50 A
- Customized variants for current of 200 A .. 2 kA available
Most sold
| Product | Description |
| KiloPTC-10100EW-ZL800
|
Zero-voltage load with EIS 10V/800A with potentiostat 10V/100A/500W, water cooled (modelof prototype in Chemnitz)
|
| KiloPTC-10100EW-ZL1500
|
Zero-voltage load with EIS 10V/1500A with potentiostat 10V/100A, water cooled
|
| KiloPTC-05100EA-ZL200
|
Zero-voltage load with EIS 10V/200A with potentiostat 10V/100A, air cooled
|
If these variants do not suit you, please contact us, we offer customized solutions!
RELATED PRODUCTS
Potentiostat - for research and testing of hydrogen cells, + -5 V, + -20 A, Current ranges 20 mA-20 A, Impedance spectroscopy up to 1MHz
KiloLoad - system for testing and EIS measurements of automotive-grade cells (e.g. 500 cm2) with currents up to 2 kA, AC current for EIS up to 50 A.
StackEIS - Impedance spectroscopy measurement at high-power fuel-cell stacks
CONTACT US
If you need more information or looking for specific solution or product, contact us through this form or on email sales@kolibrik.net!